Trial & acceptance checks
- Observe bridging, surging and the effect of pauses in the peeling station.
- Record how the hopper is emptied at the end of a batch.
- Check that the feed mechanism does not introduce an uncontrolled amount of air.
Make puree
Flesh feed & enclosed transfer
Control exposed hold-up and keep the pulper supplied without packing a viscous feed into an unsuitable inlet.
FEED
Peeled flesh or accepted purchased flesh
PRODUCT / HANDOVER
Enquire about this equipment ↗Even feed into size reduction
INPUT
Peeled flesh or accepted purchased flesh
OUTPUT
Even feed into size reduction
Required acceptance/feed interface for either raw-material route.
Structure & operating role
An accessible receiving hopper with a selected feeder presents flesh to size reduction. The feeder geometry and drive are chosen from the incoming pieces and flow behaviour.
Define the duty before selecting a model
01
Piece size and feed consistency
02
Hopper working volume and hold time
03
Feeder speed range and discharge connection
Model, installed power, envelope dimensions and offered capacity are confirmed together in the equipment proposal. The values must refer to the agreed product and conditions.
Upstream and downstream
Match pulper inlet geometry and low-level control. Purchased-flesh packaging must be opened and removed without contaminating the ingredient.
Next connected duty →Drain-down & cleaning
Provide a safe way to expose the feeder and the hopper outlet. Retained pulp behind guards or at the discharge is part of the inspection scope.
Selection limit
A nominal hopper volume is not a guarantee of stable feeding for every ripeness condition.
Prepare sample evidence →Move your project forward
Discuss flesh feed & enclosed transfer
Start with your raw material, required puree and production basis.